Author

admin

Browsing

Several federal prosecutors in Minnesota were formally fired on Wednesday after they gave notice that they had resigned in the wake of internal disagreements over the Justice Department’s handling of a shooting investigation involving Immigration and Customs Enforcement.

The DOJ, at the direction of Attorney General Pam Bondi and Deputy Attorney General Todd Blanche, terminated the employment of five prosecutors in the U.S. attorney’s office in Minnesota, including Joseph Thompson, the No. 2 official there,according to two sources familiar with the matter.

Their resignations and the internal disputes about the shooting probe first surfaced in the New York Times. The prosecutors were positioned to receive paid leave for months prior to their firings on Wednesday,according to the sources.

Thompson was spearheading a massive, high-profile investigation into welfare fraud in the state before he submitted his resignation. His exit came after he clashed with officials in Washington, D.C., over the investigation into the ICE shooting, which left 37-year-old Renee Good dead. Fox News Digital reached out to the U.S. Attorney’s Office in Minnesota in an effort to reach Thompson for comment.

Thompson had expressed during a call with DOJ and FBI officials last week that he was on board with investigating the ICE shooting as an assault on or obstruction of a law enforcement officer, a source familiar with the call told Fox News Digital.

Another one of the fired prosecutors, Melinda Williams, who was also involved in the fraud work, was on the call as well, the source said.

Thompson also indicated that he believed the shooting was justified, two sources said. Prior to the shooting, he had already been discussing the possibility of resigning, the sources said.

Videos of the shooting showed an ICE agent opening fire on Good at close range after she was seen accelerating toward the agent in her vehicle while he was standing in front of it. Critics have argued that the agent improperly used deadly force against Good and that she had turned the wheels of her vehicle away from the agent before accelerating.

The FBI is investigating the incident and has excluded Minnesota prosecutors from the probe, which the Trump administration has said is justified because the incident involved a federal officer. Minnesota leaders have denounced that decision and launched their own parallel investigation.

While supportive of conducting the investigation as an offensive against law enforcement — rather than a civil rights matter against the agent — Thompson had reservations during last week’s call about the DOJ’s plan to also investigate Good’s widow and other possible co-conspirators, the source familiar with the call said.

The FBI had developed evidence that suggested Good and her spouse had at some point been following ICE officers on the day of the shooting, the source said.

That revelation echoes Homeland Security Secretary Kristi Noem’s allegations during a recent press conference that Good had been ‘stalking and impeding’ ICE throughout the day of the shooting. Noem said Good ‘weaponized’ her vehicle and that the ICE agent who fired shots feared for his life.

In a statement to Minnesota Public Radio, Good’s spouse, Becca, said that on Jan. 7, the day of the shooting, she and Renee ‘stopped to support [their] neighbors.’

‘We had whistles. They had guns,’ Becca Good said.

Minneapolis Mayor Jacob Frey and other Democrats have lauded the prosecutors who resigned, framing their departures as a valiant boycott against DOJ.

‘These prosecutors are heroes, and the people pushing to prosecute Renee’s widow are monsters,’ Frey wrote on X.

At this stage, there is no sign that the DOJ is planning to bring charges against Becca Good, despite the DOJ and FBI pursuing an investigation into her as part of a broader probe into any conspiracies to hinder federal law enforcement operations.

Fox News Digital reached out to the DOJ for comment.

David Spunt contributed to this report.

This post appeared first on FOX NEWS

Brunswick Exploration Inc. (TSX-V: BRW, OTCQB: BRWXF; ‘ BRW ‘ or the ‘ Company ‘) is pleased to announce inaugural drilling results from its Anatacau Main Project, located in the Eeyou Istchee-James Bay region of Quebec. All drillholes were centered on the Anais showing and intercepted multiple, large spodumene-bearing pegmatites with rich lithium mineralization. The pegmatites are found along a major deformation corridor, reminiscent of the neighboring Galaxy deposit owned by Rio Tinto located 22 kilometers to the West.

Highlights include:

  • 1.66% Li2O over 47.2 meters in drill hole AN-25-05 within a larger package of continuous lithium mineralization (present within both country rock and pegmatites) of 120.7 meters at 1.31% Li2O .
  • Very high cesium values intercepted in multiple secondary sub-parallel dykes including 1.46% Cs2O over 1 meter and 0.8% Cs2O over 1 meter.
  • This latest discovery is now drill traced over 170 meters of strike length and is open in all directions.

Mr. Killian Charles, President and CEO of BRW, commented: ‘Today’s exciting results underscores the opportunities across our continuously growing portfolio. We are rapidly starting to define a sizeable lithium system at Anatacau Main which, importantly, remains open in all directions. Furthermore, we are seeing mineralization constrained to the same structural corridor that is found at Rio Tinto’s Galaxy project (54.3Mt M&I at 1.30% Li2O and 55.9Mt Inferred at 1.29%, see Note ) and BRW’s Anatacau West. At Anatacau Main, we control over 18 kilometers of this highly prospective corridor which will be the focus of subsequent work in Q1 2026.

Between these strong results at Anatacau, a forthcoming maiden resource estimate for Mirage, an inaugural drill campaign in Greenland and further growth opportunities beyond the existing portfolio, Brunswick Exploration is among the most exciting companies in the lithium exploration space.’

Table 1 : Mineralized Intercepts from Inaugural Drilling Program at Anatacau Main

True thickness is estimated between 65% and 85%

Figure 1 : Surface Map of the Anatacau Main Project and Drill Holes Completed to Date

Results Interpretation

The largest pegmatite outcrop observed at the Anais showing has now been extended to over 170 meters in strike length and to a maximum depth of 98 meters. It remains open in all direction with an apparent thickness of 47.2 meters (DDH AN-25-05) at its widest point. The main pegmatite dyke is interpreted to be dipping 85 degrees to the West. Several other, well-mineralized stacked pegmatite intervals were also intercepted in all holes, demonstrating the potential for more dyke discoveries in the vicinity of the outcrop (Figure 1). The mineralized dykes discovered at Anatacau straddle the southern side of an interpreted major deformation zone, striking northwest-southeast; a structural control that is reminiscent of the Galaxy deposit (Figure 2). The different pegmatite dykes appear to be oriented North-South to Northeast-Southwest.

The pegmatite dykes show excellent continuity in terms and mineralogy and grade, with several high-grade zones intersected to date (Table 1, Figure 3). The mineralized pegmatite dykes typically exhibit massive to coarse crystals (15+centimeters) with a mineralogy consisting of quartz, white K-feldspar, plagioclase, white spodumene, and minor amounts of muscovite, fine-grained tourmaline, and blue apatite. Spodumene crystals are inclusion-free and are consistently white unlike spodumene mineralization found at the Galaxy deposit and Anatacau West which varies from off-white to greenish. Some pegmatite intervals are under the cut-off of 0.3% Li2O but demonstrate high values of tantalum and cesium (up to 1.46% Cs2O in a 1 meter interval). This highlights the potential for other types of mineralization and by-products at the Anatacau Main project, a feature uncommon in other James Bay projects.

Host rocks consist of greywacke and amphibolite, locally deformed into schist near the deformation zone where pegmatites seem to propagate well into both units. Holmquistite, a lithium amphibole, is commonly observed in all host rocks at varying concentrations (up to 1.5% Li2O in host rock) over significant widths. This pervasive lithium alteration is potentially indicative of significant lithium bearing fluids along the deformation corridor and could be potentially used as a vectoring tool for further discoveries.

A geometallurgical study is underway at SGS using DMS (Dense Media Separation) with results expected early in 2026.

Figure 2 : Regional Map of the Anatacau Main and Anatacau West Projects

Figure 3 : Cross Section A-A’ (see Figure 1 for Location)

Table 2 : Drill Hole Collars (UTM Nad83, Zone 18N)

Drill hole Azimut Dip Length UTM X UTM Y
AN-25-01 78 -49.2 126 380436.08 5784638.25
AN-25-02 78 -72.26 93 380436.08 5784638.25
AN-25-03 98.33 -50.53 144 380384.73 5784678.00
AN-25-04 129 -49.27 108 380384.42 5784599.78
AN-25-05 140 -49.27 159 380329.20 5784591.66
AN-25-06 140 -49.26 165 380232.46 5784553.73


Anatacau Drilling Campaign Overview

Six (6) diamond drill holes were completed (see Figure 1 and Table 2) for a total of 750 meters. The holes were spaced by 55 to 100m, and all holes intercepted mineralized pegmatites.

The aim of the 2025 drilling campaign was to test at shallow depths (less than 150 meters vertical depth) the pegmatite dykes mapped at surface on the Anaïs showing. The drilling campaign was performed in HQ size to perform a geometallurgical study, planned according to a grant from the Ministry of Natural Resources and Forests of the Quebec Government.

Brunswick Exploration discovered the Anais showing in 2023, which consists of several parallel pegmatite dykes with visible spodumene mineralization. The largest dyke found to date is exposed over a 15 m wide by 100m long outcrop. Several grab samples returned high grade values ranging from1.19 to 3.83% Li2O on the outcrop itself (see press release dated July 13, 2023). The Anais lithium discovery is located 22 kilometers East and along strike from Rio Tinto’s Galaxy project and BRW’s Anatacau West project.

Note

SEC Technical Report Summary for the James Bay Lithium Project prepared by SLR Consulting (Canada), Wave International Pty and WSP Canada for Arcadium Lithium Plc., dated August 31 2023

About the Anatacau Project

The Anatacau Main and the Anatacau West Projects are under option from Osisko GP, a subsidiary of Osisko Development whereby BRW can earn a 90% interest in the projects. For further details, please refer to the November 28, 2022 News release.

QAQC

All drill core samples were collected under the supervision of BRW employees and contractors. The drill core was transported by helicopter to the logging facility at camp Wabamisk. and by truck from the drill platform to the core logging Each core was then logged, photographed, tagged, and then packed to be shipped to Val-d’Or. Core splitting by diamond saw and sampling was done by BRW contractor at their Val-d’Or facility. All pegmatite intervals were sampled at approximately 1m intervals to ensure representativity, excluding all host rock material. Host rock was also sent for analysis 1m before and after each pegmatite interval. Samples were bagged, and blanks, pulp duplicates and certified reference materials for lithium were inserted at regular intervals. Groups of samples were placed in larger bags, sealed with numbered tags, in order to maintain a chain of custody. The sample bags were transported from BRW contractor facility to the Agat laboratory in Val-d’Or. All sample preparation and analytical work was performed by Agat Laboratories. Samples were crushed in order for 75% of the material to pass through a 2mm screen (method 200075), split to a sub-sample of 250g, and the split sample pulverized (200087) to obtain more than 85% of the material passing a 75µm screen. A sub-sample of the pulverized fraction was dissolved in a sodium peroxide solution, prior to lithium analysis by ICP-OES and ICP-MS according to the Agat method 201378. All results passed the QA/QC screening at the laboratory, and all inserted standard, duplicates and blanks returned results that were within acceptable limits. All reported drill intersections are calculated on the basis of a lower cutoff grade of 0.30% Li2O.

Qualified Person

The scientific and technical information contained in this press release has been reviewed and approved by Mr. François Goulet, Manager Quebec. He is a Professional Geologist registered in Quebec and is a Qualified Person as defined by National Instrument 43-101.

About Brunswick Exploration

Brunswick Exploration is a Montreal-based mineral exploration company listed on the TSX-V under symbol BRW. The Company is focused on grassroots exploration for lithium in Canada, a critical metal necessary to global decarbonization and energy transition. The company is rapidly advancing its extensive grassroots lithium property portfolio in Canada and Greenland.

Investor Relations/information

Mr. Killian Charles, President and CEO ( info@brwexplo.ca )

Cautionary Statement on Forward-Looking Information

This news release contains ‘forward-looking information’ within the meaning of applicable Canadian securities legislation based on expectations, estimates and projections as at the date of this news release. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, performance, prospects and opportunities to differ materially from those expressed or implied by such forward-looking information. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, delays in obtaining or failures to obtain required governmental, environmental or other project approvals; uncertainties relating to the availability and costs of financing needed in the future; changes in equity markets; inflation; fluctuations in commodity prices; delays in the development of projects; the other risks involved in the mineral exploration and development industry; and those risks set out in the Corporation’s public documents filed on SEDAR at www.sedar.com. Although the Corporation believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information, which only applies as of the date of this news release, and no assurance can be given that such events will occur in the disclosed time frames or at all. The Corporation disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, other than as required by law. Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.

A tables accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/1841b3d5-7add-44fc-9098-bfc9a3ad1b96

Figures accompanying this announcement are available at:

https://www.globenewswire.com/NewsRoom/AttachmentNg/8f3d17e7-4ea2-4967-9ae5-99fc74320957

https://www.globenewswire.com/NewsRoom/AttachmentNg/d76899b2-eec4-43a8-8af9-0c912d555c2a

https://www.globenewswire.com/NewsRoom/AttachmentNg/76da0e33-bcfd-4bc2-bbff-76e34511dfa7

News Provided by GlobeNewswire via QuoteMedia

This post appeared first on investingnews.com

Osisko Metals Incorporated (the ‘ Company ‘ or ‘ Osisko Metals ‘) ( TSX: OM,OTC:OMZNF ; OTCQX: OMZNF ; FRANKFURT: 0B51 ) is pleased to announce new drill results from the Gaspé Copper Project, located in the Gaspé Peninsula of Eastern Québec.

Osisko Metals CEO Robert Wares commented: ‘These latest results continue to confirm and expand our resource model with several long continuous intersections of copper and molybdenum mineralization in the core of the deposit. The new drilling keeps deepening the deposit and again confirms its southern extension with holes 30-1119 and 30-1124. We are excited about the growth of our project, especially within the context of a fundamental rising metal market where copper spot price is rapidly approaching US$5/lb, silver is at US$47/oz and molybdenum is holding steady at over US$30/lb.’

New analytical results are presented below (see Table 1), including 33 mineralized intercepts from nine new drill holes. Infill intercepts are located inside the 2024 MRE model ( see November 14, 2024 news release ), and are focused on upgrading inferred mineral resources to measured or indicated categories, as applicable. Expansion intercepts are located outside the 2024 MRE model and may potentially lead to additional resources that will be classified appropriately within the next MRE update. Some of the reported intercepts have contiguous shallower infill as well as deeper expansion (noted on Table 1 below as ‘Both’). Maps showing hole locations are available at www.osiskometals.com .

Highlights:

  • Drill hole 30-1107
    • 592.0 metres averaging 0.33% Cu (0.46 CuEq) (infill and expansion)
  • Drill hole 30-1112
    • 868.5 metres averaging 0.23% Cu (0.30 CuEq) (infill and expansion)
  • Drill hole 30-1114
    • 142.1 metres averaging 0.39% Cu (0.47 CuEq) (expansion)
  • Drill hole 30-1116
    • 565.5 metres averaging 0.22% Cu (0.29 CuEq) (infill and expansion)
  • Drill hole 30-1119
    • 46.4 metres averaging 1.10% Cu (1.25 CuEq) (expansion)
  • Drill hole 30-1122
    • 760.5 metres averaging 0.24% Cu (0.30 CuEq) (infill and expansion)
  • Drill hole 30-1124
    • 200.5 metres averaging 0.32% Cu (0.37 CuEq) (expansion)
    • 203.2 metres averaging 0.37% Cu (0.39 CuEq) (expansion)

Table 1: Infill and Expansion Drilling Results

DDH No. From (m) To (m) Length (m) Cu % Ag g/t Mo % CuEq* Type**
30-1107 8.3 133.0 124.7 0.20 1.71 0.21 Infill
And 166.5 360.0 193.5 0.16 1.35 0.18 Infill
And 411.0 1003.0 592.0 0.33 1.68 0.032 0.46 Both
(including) 411.0 666.4 255.4 0.32 1.78 0.030 0.45 Infill
(including) 666.4 1003.0 336.6 0.33 1.60 0.033 0.46 Expansion
And 1043.7 1076.2 32.5 0.18 1.55 0.044 0.35 Expansion
30-1112 133.5 205.5 72.0 0.13 1.29 0.006 0.16 Infill
And 250.5 1119.0 868.5 0.23 1.45 0.019 0.30 Both
(including) 250.5 702.0 451.5 0.24 1.50 0.014 0.30 Infill
(including) 702.0 1119.0 417.0 0.21 1.40 0.024 0.31 Expansion
30-1113 62.0 90.0 28.0 0.19 0.85 0.19 Infill
And 147.0 186.0 39.0 0.15 0.68 0.15 Infill
And 501.0 543.0 42.0 0.47 2.14 0.026 0.58 Infill
And 743.0 769.0 26.0 0.16 1.89 0.013 0.22 Expansion
30-1114 2.5 56.0 53.5 0.25 2.80 2.80 Infill
And 121.5 145.5 24.0 0.19 2.01 0.21 Infill
And 607.5 633.0 25.5 0.68 6.52 0.158 1.32 Infill
And 808.5 950.6 142.1 0.39 1.50 0.019 0.47 Expansion
30-1116 55.0 157.0 102.0 0.25 2.11 0.27 Infill
And 205.5 771.0 565.5 0.22 1.86 0.017 0.29 Both
(including) 205.5 674.7 469.2 0.22 2.02 0.016 0.29 Infill
(including) 674.7 771.0 96.3 0.21 1.07 0.020 0.30 Expansion
And 802.5 840.0 37.5 0.15 1.12 0.036 0.29 Expansion
And 886.0 993.0 107.0 0.22 0.94 0.023 0.31 Expansion
And 1016.8 1050.0 33.2 0.30 2.01 0.012 0.35 Expansion
And 1084.7 1110.3 25.6 0.25 1.45 0.022 0.34 Expansion
30-1119 28.0 165.0 137.0 0.33 2.56 0.34 Infill
And 195.2 211.5 16.3 0.51 3.24 0.53 Expansion
And 253.6 307.5 53.9 0.25 2.54 0.023 0.35 Expansion
And 421.6 468.0 46.4 1.10 5.08 0.032 1.25 Expansion
(including) 454.0 461.5 7.5 5.35 18.2 0.165 6.08 Expansion
And 490.5 519.0 28.5 0.61 2.91 0.63 Expansion
30-1121 No significant results
30-1122 46.0 129.0 83.0 0.19 1.97 0.20 Infill
And 154.5 174.0 19.5 0.14 1.75 0.16 Infill
And 376.5 1137.0 760.5 0.24 1.71 0.015 0.30 Both
(including) 376.5 680.9 304.4 0.23 1.64 0.017 0.30 Infill
(including) 680.9 1137.0 456.1 0.24 2.82 0.014 0.31 Expansion
30-1124 14.0 69.0 55.0 0.19 1.90 0.20 Expansion
And 92.0 292.5 200.5 0.32 2.43 0.009 0.37 Expansion
And 416.3 619.5 203.2 0.37 2.81 0.39 Expansion

* See explanatory notes below on copper equivalent values and Quality Assurance/Quality Controls.
** ‘Both’ indicates drill holes that have contiguous shallower infill as well as deeper expansion intercepts.

Discussion

Drill hole 30-1107, located on top of Copper Mountain near the center of the 2024 MRE model, cut three mineralized intervals including 592.0 metres averaging 0.33 % Cu, 1.68 g/t Ag and 0.032% Mo (which includes 336.6 metres of depth expansion), extending mineralization in this area to a vertical depth of 1003 metres.

Drill hole 30-1112, located on the western flank of Copper Mountain, cut two mineralized intervals including 868.5 metres averaging 0.23 % Cu, 1.45 g/t Ag and 0.019% Mo (which includes 417.0 metres of depth expansion), extending mineralization in this area to a vertical depth of 1119 metres.

Drill hole 30-1113, located on the western margin of the 2024 MRE model, cut multiple intersections of mineralization, 26 to 42 metres thick and distributed in ‘layer cake’ fashion from surface to a vertical depth of 769 metres, confirming the current limit of the 2024 MRE model at this location.

Drill hole 30-1114, located near the eastern margin of the 2024 MRE model, cut multiple intersections of mineralization distributed in ‘layer cake’ fashion from surface to a vertical depth of 950 metres, including 142.1 metres averaging 0.39 % Cu, 1.50 g/t Ag and 0.019% Mo (expansion).

Drill hole 30-1116, located on top of Copper Mountain near the center of the 2024 MRE model, cut six mineralized intervals including 565.5 metres averaging 0.22 % Cu, 1.86 g/t Ag and 0.017% Mo (which includes 96.3 metres of depth expansion), extending mineralization in this area to a vertical depth of 1110 metres.

Drill holes 30-1119 and 30-1124, both located immediately south of the southern margin of the 2024 MRE model, cut multiple intersections of mineralization, including 46.4 metres averaging 1.10 % Cu, 5.08 g/t Ag and 0.032% Mo near and including the E Zone skarn horizon (30-1119) and 203.2 metres averaging 0.37% Cu and 2.81 g/t Ag (30-1124). These intersections extend mineralization to a vertical depth of 619 metres within the southern expansion of the deposit, which remains open towards Needle Mountain East.

Drill hole 30-1121, located 50 metres east of the 2024 MRE model, did not intersect significant mineralization as expected, once again confirming the current eastern limit of the resource model.

Drill hole 30-1122, located on the western flank of Copper Mountain, intersected three mineralized intervals, including 760.5 metres averaging 0.24% Cu, 1.71 g/t Ag and 0.015% Mo (which includes 456.1 metres of depth expansion), extending mineralization in this area to a vertical depth of 1137 metres.

Mineralization at Gaspé Copper is of porphyry copper/skarn type and occurs as disseminations and stockworks of chalcopyrite with pyrite or pyrrhotite and minor bornite and molybdenite. One prograde and at least five retrograde vein/stockwork mineralizing events have been recognized at Copper Mountain, which overprint earlier, bedding replacement skarn and porcellanite-hosted mineralization throughout the Gaspé Copper system. Porcellanite is a historical mining term used to describe bleached, pale green to white potassic-altered hornfels. Subvertical stockwork mineralization dominates at Copper Mountain whereas prograde bedding-parallel mineralization, that is mostly stratigraphically controlled, dominates in the area of lower Copper Mountain, Needle Mountain, Needle East, and Copper Brook. High molybdenum grades (up to 0.5% Mo) were locally obtained in both the C Zone and E Zone skarns away from Copper Mountain.

The 2022 to 2024 Osisko Metals drill programs were focused on defining open-pit resources within the Copper Mountain stockwork mineralization ( see May 6, 2024 MRE press release ). Extending the resource model south of Copper Mountain into the poorly-drilled prograde skarn/porcellanite portion of the system subsequently led to a significantly increased resource, mostly in the Inferred category ( see November 14, 2024 MRE press release ).

The current drill program is designed to convert the November 2024 MRE to Measured and Indicated categories, as well as test the expansion of the system deeper into the stratigraphy and laterally to the south and southwest towards Needle East and Needle Mountain respectively. The November 2024 MRE was limited at depth to the base of the L1 skarn horizon (C Zone), and all mineralized intersections below this horizon represent potential depth extensions to the deposit, to be included in the next scheduled MRE update in Q1 2026.

All holes are being drilled sub-vertically into the altered calcareous stratigraphy which dips 20 to 25 degrees to the north. The L1 (C Zone) the L2 (E Zone) skarn/marble horizons were intersected in most holes, as well as intervening porcellanites that host the bulk of the disseminated copper mineralization.

Table 2: Drill hole locations

DDH No. Azimuth (°) Dip (°) Length (m) UTM E UTM N Elevation
30-1107 0.0 -90.0 1089.0 316191.0 5426207.0 739.3
30-1112 65.0 -88.0 1149.0 315863.0 5426398.0 700.0
30-1113 0.0 -90.0 999.0 315400.0 5426334.0 592.5
30-1114 0.0 -90.0 1071.0 316500.0 5426260.0 641.6
30-1116 0.0 -90.0 1152.0 316283.0 5426222.9 728.1
30-1119 230.0 -85.0 711.0 316190.0 5425725.0 561.2
30-1121 0.0 -90.0 873.0 316679.0 5425914.0 596.4
30-1122 0.0 -90.0 1152.0 315900.0 5426327.0 695.7
30-1124 0.0 -90.0 642.0 316215.0 5425601.0 560.0


Explanatory note regarding copper-equivalent grades

Copper Equivalent grades are expressed for purposes of simplicity and are calculated taking into account: 1) metal grades; 2) estimated long-term prices of metals: US$4.25/lb copper, $20.00/lb molybdenum, and US$24/oz silver; 3) estimated recoveries of 92%, 70%, and 70% for Cu, Mo, and Ag respectively; and 4) net smelter return value of metals as percentage of the price, estimated at 86.5%, 90.7%, and 75.0% for Cu, Mo, and Ag respectively.

Qualified Person

The scientific and technical content of this news release has been reviewed and approved by Mr. Bernard-Olivier Martel, P. Geo. (OGQ 492), an independent ‘qualified person’ as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects (‘NI 43-101’).

Quality Assurance / Quality Control

Mineralized intervals reported herein are calculated using an average 0.12% CuEq lower cut-off over contiguous 20-metre intersections (shorter intervals as the case may be at the upper and lower limits of reported intervals). Intervals of 20 metres or less are not reported unless indicating significantly higher grades . True widths are estimated at 90 – 92% of the reported core length intervals.

Osisko Metals adheres to a strict QA/QC program for core handling, sampling, sample transportation and analyses, including insertion of blanks and standards in the sample stream. Drill core is drilled in HQ or NQ diameter and securely transported to its core processing facility on site, where it is logged, cut and sampled. Samples selected for assay are sealed and shipped to ALS Canada Ltd.’s preparation facility in Sudbury. Sample preparation details (code PREP-31DH) are available on the ALS Canada website. Pulps are analyzed at the ALS Canada Ltd. facility in North Vancouver, BC. All samples are analyzed by four acid digestion followed by both ICP-AES and ICP-MS for Cu, Mo and Ag.

About Osisko Metals

Osisko Metals Incorporated is a Canadian exploration and development company creating value in the critical metals sector, with a focus on copper and zinc. The Company acquired a 100% interest in the past-producing Gaspé Copper mine from Glencore Canada Corporation in July 2023. The Gaspé Copper mine is located near Murdochville in Québec s Gaspé Peninsula. The Company is currently focused on resource expansion of the Gaspé Copper system, with current Indicated Mineral Resources of 824 Mt averaging 0.34% CuEq and Inferred Mineral Resources of 670 Mt averaging 0.38% CuEq (in compliance with NI 43-101). For more information, see Osisko Metals’ November 14, 2024 news release entitled ‘Osisko Metals Announces Significant Increase in Mineral Resource at Gaspé Copper’. Gaspé Copper hosts the largest undeveloped copper resource in eastern North America, strategically located near existing infrastructure in the mining-friendly province of Québec.

In addition to the Gaspé Copper project, the Company is working with Appian Capital Advisory LLP through the Pine Point Mining Limited joint venture to advance one of Canada s largest past-producing zinc mining camps, the Pine Point project, located in the Northwest Territories. The current mineral resource estimate for the Pine Point project consists of Indicated Mineral Resources of 49.5 Mt averaging 5.52% ZnEq and Inferred Mineral Resources of 8.3 Mt averaging 5.64% ZnEq (in compliance with NI 43-101). For more information, see Osisko Metals June 25, 2024 news release entitled ‘Osisko Metals releases Pine Point mineral resource estimate: 49.5 million tonnes of indicated resources at 5.52% ZnEq’. The Pine Point project is located on the south shore of Great Slave Lake, NWT, close to infrastructure, with paved road access, an electrical substation and 100 kilometres of viable haul roads.

For further information on this news release, visit www.osiskometals.com or contact:

Don Njegovan, President
Email: info@osiskometals.com
Phone: (416) 500-4129

Cautionary Statement on Forward-Looking Information

This news release contains ‘forward-looking information’ within the meaning of applicable Canadian securities legislation based on expectations, estimates and projections as at the date of this news release. Any statement that involves predictions, expectations, interpretations, beliefs, plans, projections, objectives, assumptions, future events or performance (often, but not always, using phrases such as ‘expects’, or ‘does not expect’, ‘is expected’, ‘interpreted’, ‘management’s view’, ‘anticipates’ or ‘does not anticipate’, ‘plans’, ‘budget’, ‘scheduled’, ‘forecasts’, ‘estimates’, ‘potential’, ‘feasibility’, ‘believes’ or ‘intends’ or variations of such words and phrases or stating that certain actions, events or results ‘may’ or ‘could’, ‘would’, ‘might’ or ‘will’ be taken, occur or be achieved) are not statements of historical fact and may be forward-looking information and are intended to identify forward-looking information. This news release contains forward-looking information pertaining to, among other things: the tax treatment of the FT Units; the timing of incurring the Qualifying Expenditures and the renunciation of the Qualifying Expenditures; the ability to advance Gaspé Copper to a construction decision (if at all); the ability to increase the Company’s trading liquidity and enhance its capital markets presence; the potential re-rating of the Company; the ability for the Company to unlock the full potential of its assets and achieve success; the ability for the Company to create value for its shareholders; the advancement of the Pine Point project; the anticipated resource expansion of the Gaspé Copper system and Gaspé Copper hosting the largest undeveloped copper resource in eastern North America.

Forward-looking information is not a guarantee of future performance and is based upon a number of estimates and assumptions of management, in light of management’s experience and perception of trends, current conditions and expected developments, as well as other factors that management believes to be relevant and reasonable in the circumstances, including, without limitation, assumptions about: the ability of exploration results, including drilling, to accurately predict mineralization; errors in geological modelling; insufficient data; equity and debt capital markets; future spot prices of copper and zinc; the timing and results of exploration and drilling programs; the accuracy of mineral resource estimates; production costs; political and regulatory stability; the receipt of governmental and third party approvals; licenses and permits being received on favourable terms; sustained labour stability; stability in financial and capital markets; availability of mining equipment and positive relations with local communities and groups. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, performance, prospects and opportunities to differ materially from those expressed or implied by such forward-looking information. Factors that could cause actual results to differ materially from such forward-looking information are set out in the Company’s public disclosure record on SEDAR+ (www.sedarplus.ca) under Osisko Metals’ issuer profile. Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information, which only applies as of the date of this news release, and no assurance can be given that such events will occur in the disclosed time frames or at all. The Company disclaims any intention or obligation to update or revise any forward- looking information, whether as a result of new information, future events or otherwise, other than as required by law.

Neither the TSX Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Exchange) accept responsibility for the adequacy or accuracy of this news release. No stock exchange, securities commission, or other regulatory authority has approved or disapproved the information contained herein.

Photos accompanying this announcement are available at:

https://www.globenewswire.com/NewsRoom/AttachmentNg/b75a44c9-c3d1-4549-9e5b-30807d2ef1cd

https://www.globenewswire.com/NewsRoom/AttachmentNg/9c2ebe67-e04a-4037-8b72-6a6775067a1c

News Provided by GlobeNewswire via QuoteMedia

This post appeared first on investingnews.com

A long weekend away from Washington, D.C., did little to soften Senate Democrats’ resolve as they again blocked an effort to reopen the government for an eighth time Tuesday.

The beginning of mass firings promised by the Trump administration and Office of Management and Budget (OMB) Director Russ Vought over the weekend also failed to sway Senate Democrats, led by Senate Minority Leader Chuck Schumer, D-N.Y.

One pressure point was alleviated for both sides, however, with President Donald Trump’s directive to move money around at the Pentagon to pay military service members. Their paychecks are due Oct. 15.

Still, another payday, this time for Senate staffers, is fast approaching on Oct. 20.

Both sides are still dug into the same positions that launched the shutdown earlier this month, too. Talks between the opposing factions are still ongoing but have not yet yielded a result that either side is ready to move on.  

Senate Democrats want an extension to expiring Obamacare subsidies before the Nov. 1 open enrollment date, and they argue that unless Congress takes action, Americans that rely on the Affordable Care Act (ACA) tax credits will see their premiums skyrocket.

However, Trump appears unwilling to cave into Senate Democrats’ demands, and reupped Republicans’ argument that Democrats wanted to undo a total of $1.5 trillion in spending cuts from the ‘big, beautiful bill’ and clawback of funding for NPR and PBS to give, in part, to illegal immigrants. 

‘I don’t want to bore you with the fact that Schumer said 100 times, ‘You should never close our government,’’ Trump told reporters at the White House. ‘But Schumer is a weakened politician. I mean, he’s going to finish his career as a failed politician, as a failed politician. He’s allowed the radical left to take over the Democrat Party.’

Senate Republicans have said that they’re open to negotiating a deal on the subsidies, with reforms to the program only after the government reopens. And Senate Majority Leader John Thune, R-S.D., for now, has no intention of straying from his plan to continue to bring the House Republicans’ short-term continuing resolution (CR) to the floor again and again.

‘Democrats like to whine that Republicans aren’t negotiating, but negotiation, Mr. President, is what you do when each side has a list of demands and you need to meet in the middle,’ Thune said on the Senate floor. ‘Republicans, as I and a lot of other people pointed out, haven’t put forward any demands. Only Democrats have made demands. And by the way, very expensive demands.’ 

Schumer noted on the Senate floor that every time Thune has put the GOP’s bill on the floor, it has failed. 

‘That means, like it or not, the Republican leader needs to work with Democrats in a bipartisan way to reopen the government, just as we did when we passed 13 CRs when I was majority leader,’ he said. 

The administration’s movement on reductions in force (RIFs) over the weekend, and the lingering threat that thousands of nonessential furloughed federal employees may not get back pay once the shutdown ends have not swayed Senate Democrats.

The same trio of Senate Democratic caucus members, Sens. John Fetterman, D-Pa., Catherine Cortez Masto, D-Nev., and Angus King, I-Maine, all broke ranks with Schumer support reopening the government.

‘Donald Trump, come to the negotiating table,’ Sen. Chris Van Hollen, D-Md., said at a rally outside the OMB on Tuesday. ‘Bring down costs and prices and stop inflicting harm and terrorizing federal employees and the American people.’

While most action on Capitol Hill has ground to a halt as the shutdown continues — the House, for example, has been out of session for over three weeks — the Senate has moved on other legislation, including the 2026 National Defense Authorization Act and a massive package of Trump’s nominees. Thune also teased last week that the defense spending bill could come to the floor soon.

The latest failed attempt comes on the 14th day of the shutdown and all but ensures that the closure will last into at least a third week.

It also puts this shutdown, in particular, into historic territory. While the longest shutdown on record, from late 2018 to early 2019, was under Trump’s first term, it was only partial. A handful of appropriations bills had already passed at the time, including funding for the legislative branch and defense.

But the longest full shutdown happened over two decades earlier under former President Bill Clinton between late 1995 and early 1996. That shutdown lasted 21 days and was over a budget dispute between Clinton and then-House Speaker Newt Gingrich.

That particular dispute also led to two shutdowns in that fiscal year, the first in November and the second setting the 21-day record. 

This post appeared first on FOX NEWS

Sen. Josh Hawley, R-Mo., is introducing legislation this week that would fully ban coverage of abortion and gender transition care for minors within the Affordable Care Act (ACA), Fox News Digital has learned.

While existing law prohibits the use of federal funds to pay for elective abortions under the Hyde Amendment, many plans on the ACA exchanges still offer abortion coverage via various state-level loopholes and separate bill schemes. Hawley’s legislation would expressly state that no ACA healthcare plan can cover an abortion procedure, except in cases of rape, incest or a threat to the life of the mother.

The legislation would similarly ban plans from offering coverage for gender transition care for minors, both in the form of drugs or procedures.

‘It’s time to ban abortion and gender transitions for minors on the healthcare exchanges,’ Hawley said in a statement to Fox News Digital. ‘No more loopholes.’

The legislative push comes as the Senate is already set to be focused on the ACA in the coming weeks, with a deadline for extending Obamacare subsidies looming with the Nov. 1 open enrollment date.

Democrats are already raising their voices about pushing through an extension, but Senate Republicans have said they’re open to negotiating a deal on the subsidies — with reforms — only after the government reopens.

Senate Minority Leader Chuck Schumer, D-N.Y., and his fellow Democrats have blocked Republican attempts to end the government shutdown eight times since Oct. 1. Schumer argues Republicans must come to the table with concessions, while Senate Majority Leader John Thune, R-S.D., says the opposition’s demands are unreasonable.

‘Democrats like to whine that Republicans aren’t negotiating, but negotiation, Mr. President, is what you do when each side has a list of demands and you need to meet in the middle,’ Thune said on the Senate floor Tuesday. ‘Republicans, as I and a lot of other people pointed out, haven’t put forward any demands. Only Democrats have made demands. And by the way, very expensive demands.’

Republicans say Democrats are demanding that the Senate undo a total of $1.5 trillion in spending cuts from the ‘big, beautiful bill’ and claw back funding for NPR and PBS to give, in part, to illegal immigrants.

If the shutdown extends past the Nov. 1 deadline, those one ACA coverage plans could see their premiums skyrocket. It would also make this year’s shutdown the longest in American history, eclipsing the previous record set under former President Bill Clinton between late 1995 and early 1996. That shutdown lasted 21 days and was over a budget dispute between Clinton and then-House Speaker Newt Gingrich.

Fox News’ Alex Miller contributed to this report

This post appeared first on FOX NEWS

Rep. Elise Stefanik, R-N.Y., and Sen. Tom Cotton, R-Ark., are pressing Treasury Secretary Scott Bessent to investigate the Council on American-Islamic Relations (CAIR), claiming that it may be funded or directed by Hamas or other terrorist groups.

CAIR describes itself as a Muslim civil rights and advocacy organization founded in 1994 with chapters across the U.S.

The request comes as President Donald Trump led a ceasefire in Gaza between Hamas and Israel.

Stefanik and Cotton allege CAIR’s historic ties, public rhetoric and activism raise questions about whether the group’s support for Hamas amounts to material support for terrorism.

The Treasury Department’s Office of Foreign Assets Control, which enforces U.S. sanctions on terrorist groups and their affiliates, has the authority to investigate whether CAIR’s activities violate federal law, the lawmakers said.

CAIR has long denied accusations of supporting Hamas, saying it ‘does not support any foreign organization or government’ and calling such claims ‘false and Islamophobic,’ according to a statement on its website. The group says its mission is to advocate for Muslim civil rights in the U.S.

Stefanik chairs the House Republican Conference, and Cotton sits on the Senate Armed Services Committee. Both have pressed for stricter enforcement of anti-terror finance laws in past oversight efforts.

In July, Stefanik criticized the City University of New York for hiring a former CAIR employee. She called the decision unacceptable to New York taxpayers.

She and Cotton say a Treasury probe would ensure no U.S. assets are used to advance the objectives of Hamas.

‘We urge the department to immediately investigate whether CAIR maintains financial links to Hamas that violate U.S. sanctions,’ they wrote.

CAIR did not immediately respond to a Fox News Digital request for comment.

This post appeared first on FOX NEWS

At a White House ceremony in the Rose Garden on Tuesday on what would have been her husband’s 32nd birthday, Erika Kirk accepted the Presidential Medal of Freedom on behalf of Charlie Kirk and delivered a powerful, deeply personal tribute to his life and legacy.

‘Thank you, Mr. President, for honoring my husband in such a profound way,’ she began. ‘Charlie always admired your commitment to freedom.’

She offered thanks to the first lady, the vice president, and friends and family ‘watching from all around the world,’ along with Turning Point USA staff and chapters nationwide. ‘You are the heartbeat of this future and of this movement,’ she said. ‘Everything Charlie built lives through you.’

Erika added that the Presidential Medal of Freedom itself is rooted in America’s Founding. ‘The very existence of the Presidential Medal of Freedom reminds us that the national interest of the United States has always been freedom,’ she said.

‘Our founders etched it into the preamble of our Constitution, and those words are not relics on parchment. They are a living covenant. The blessings of liberty are not man’s invention. They are God’s endowment.’

She recalled how Charlie wrote about freedom often. ‘He believed that liberty was both a right and a responsibility. And he used to say that freedom is the ability to do what is right without fear. And that’s how he lived,’ Erika said.

‘His name, Charles, literally means ‘free man.’ And that’s exactly who my husband was,’ she continued. ‘From the time I met him, sitting across from him being interviewed about politics, philosophy and theology, I saw the fire in his soul. There was this divine restlessness within him that came from knowing God placed him on this earth to protect something very sacred. He never stopped fighting for people to experience freedom.’

Erika recalled Charlie often saying that ‘without God, freedom becomes chaos’ and that liberty can only survive ‘when anchored to truth.’ She remembered him telling an audience: ‘The opposite of liberty isn’t law. It’s captivity. And the freest people in the world are those whose hearts belong to Christ.’

Looking back at his years building Turning Point USA, she said, ‘While he was building an organization, he was also building a movement: one that called people back to God, back to truth, and a movement that was filled with courage.’

She described him as a man who loved life’s simplest pleasures: quiet walks, shelves full of books and Saturday mornings in the sun with decaf coffee and his phone turned off for the Sabbath. His birthday tradition, she recalled, was mint chocolate chip ice cream, enjoyed only on July 4 and his birthday.

‘Last year, his one birthday wish was to see the Oregon Ducks play Ohio State — and they won,’ she said. ‘Mr. President, I can say with confidence that you have given him the best birthday gift he could ever have.’

Turning to his final moments, Erika shared: ‘It was written across his chest in those final moments on one of his simple T-shirts that always carried a message — this one bearing a single word: freedom. That was the banner over his life.’

She said her husband never told anyone what to say but always encouraged them ‘to think outside of traditional political labels, anchored in wisdom and truth.’

‘Charlie wasn’t content to simply admire freedom. He wanted to multiply it,’ Erika said. ‘He wanted young people to taste it, understand it and defend it. He wanted them to see that liberty isn’t selfish indulgence — it’s self-governance under God.’

Every day, she recalled, he lived with fearless conviction. ‘He didn’t fear being slandered. He didn’t fear losing friends. He stood for truth and stood for freedom. Everything else was just noise to him. And it’s because his confidence in Christ was absolute.’

Erika said Charlie lived ‘only 31 short years on this side of heaven,’ but filled every day with purpose. ‘He fought for truth when it was unpopular. He stood for God when it was costly. He prayed for his enemies. He loved people when it was inconvenient. He ran his race with endurance, and he kept the faith. And now he wears the crown of a righteous martyr.’

She told the audience, ‘Heaven gained what earth could no longer contain — a free man made fully free. To all watching, this is not a ceremony. This is a commissioning. I want you to be the embodiment of this medal. I want you to free yourself from fear. I want you to stand courageously in the truth. And remember that while freedom is inherited in this country, each of us must be intentional stewards of it.’

Before closing, Erika shared her daughter Gigi’s birthday message: ‘Happy birthday, daddy. I want to give you a stuffed animal. I want you to eat a cupcake with ice cream. And I want you to go have a birthday surprise. I love you.’

‘I know that you’re celebrating in heaven today, but gosh, I miss you,’ she said through tears. ‘We miss you and we love you. And we promise we’ll make you proud. Charlie’s life was proof that freedom is not a theory. It’s a testimony. He showed us that liberty begins not in the halls of power, but in the heart of a man surrendered to God.’

She ended with a final tribute: ‘To live free is the greatest gift, but to die free is the greatest victory. Happy birthday, Charlie. Happy freedom day.’

This post appeared first on FOX NEWS

Turning Point USA founder Charlie Kirk’s death has not dimmed his legacy of encouraging an increasingly ‘unhappy’ generation to seek meaning and purpose through faith and family, young Americans told Fox News Digital.

‘I think we live in a world where people are more unhappy than ever,’ Georgetown University student Elizabeth Oliver said. ‘Depression rates and suicide are so high, and people are longing for true happiness. Charlie always talked about how ‘desires of the flesh’ aren’t fulfilling or making people happy. Instead of pursuing those things, we should turn ourselves toward higher purposes like family, marriage and God, because those are what truly fulfill people’s lives.’

‘I actually think most people are searching for something,’ she said. ‘I think that searching should be directed toward God. But I think most people recognize nowadays that what the Left has to offer is not going to lead to a fulfilling life.’

Americans’ happiness has taken a nosedive in recent years, with the U.S. falling eight spots in the 2024 World Happiness Report, which ranks countries’ life satisfaction, due to American young adults reporting they are not satisfied compared to their parents’ and grandparents’ generations. Americans older than the age of 60 ranked number 10 for overall happiness, according to the study, while young adults under the age of 30 ranked 62nd internationally for happiness, CNBC reported in 2024. 

Suicide and depression rates have meanwhile skyrocketed in recent years, with the Centers for Disease Control and Prevention reporting that one-in-five high school students seriously considered attempting suicide in 2023, with suicide jumping by 62% among young adults when comparing 2007 data to 2021 data. 

Amid the increasing rates of unhappiness among youths, Kirk landed under the national spotlight as a youth, himself, rallying his peers to embrace conservative and Christian values to find peace. 

‘Marriage isn’t just a life milestone- it’s a calling. God didn’t say ‘wait until you feel ready.’ He said ‘it is not good for man to be alone.’ Get married young. Be fruitful and multiply,’ Kirk posted to Facebook just months before his death. 

His comments were even praised by Trump, who celebrated his message to young adults to get married. 

‘We have so many bad philosophies, ideologies, politics,’ Trump said on Fox News following Kirk’s death. ‘His was basically just good. He talked about family, he talked about getting married, ‘go get married. It sounds old-fashioned when you think about it, but he’s right.’ 

Kirk was shot and killed Sept. 10 during an outdoor event at Utah Valley University, the first stop on TPUSA’s planned ‘American Comeback Tour.’ 

After news of Kirk’s killing spread across the country and world, some college students are choosing to carry on his legacy by echoing the values he championed and encouraging political debate among Gen Z peers.

Oliver is one of those Gen Zers, a college senior and president of the university’s Right to Life group,a pro-life advocacy group. She told Fox News Digital that she believes open dialogue can help renew focus on Christian conservative values.

Kirk ‘dedicated his life to talking with other people respectfully and listening to them,’ she said. ‘We desperately need more of that dialogue now, more than ever. In a world that has abandoned God and moral values, we have even abandoned the basic respect for other human beings and we need to reclaim it.’

Kirk often spoke of marriage, children and the importance of family — with his widow continuing the promotion of those values from the stage of his memorial service in Arizona in September.

‘We have an uplifting message for America, one that is hopeful, one of family formation, one off church attendance going up one of business ownership of entrepreneurship,’ Kirk said on ‘The Will Cain Show’ on May 2.

‘Trump voters, young men, they want family, children, and legacy,’ Kirk added on the Ingraham Angle Sept. 8, only two days before he was killed. ‘Young women who voted for Kamala Harris, they want careerism, consumerism, and loneliness. That is a dramatic divide that is going to play out in our politics for the years to come.’

Americans’ pessimism toward the institution of marriage and family, however, currently outweighs their optimism, according to a September 2023 Pew Research Center report called, ‘Public Has Mixed Views on the Modern American Family.’ 

‘Americans most often point to job satisfaction and close friends, rather than being married or having children, when asked what contributes to a fulfilling life,’ the report found. ‘Some 71% say having a job or career they enjoy is extremely or very important for people to live a fulfilling life, and 61% say the same about having close friends. Only about a quarter say having children (26%) or being married (23%) is equally important.’

However, young adults are picking up the mantle of Kirk’s promotion of traditional values as support for TPUSA continues to grow following his death. 

Since Kirk’s assassination, Boston University College Republicans Vice President Philip Wohltorf, who also works as a legislative aide in the Massachusetts State Senate, said his group has seen a drastic increase in attendance. Democratic groups on campus, however, have not been open to debating, he said, allowing anti-conservative sentiment to spread across the student body. 

‘We were thinking, well, the left is open-minded and tolerant, they want to talk,’ he said. ‘Unfortunately, they don’t, and it doesn’t really help. I think it would be great on campus if we would have a civil, calm, challenging debate. It would show the student body that people can disagree with one another but still shake hands and be friends afterward.’

He said, ‘America was founded on the principle of freedom of speech and dialogue, and nobody did it better than Charlie Kirk,’ as the cultural divide continues to widen.

In a statement to Fox News Digital, the Boston University College Democrats said the group sent a ‘polite decline’ to a debate request, explaining that it is ‘very difficult to make debates worthwhile.’

‘We feel it is very difficult to make debates worthwhile for participants and viewers, so we decline them with everyone, not just Republicans,’ the group said. ‘Freedom of speech is something we value greatly but we believe that open bipartisan collaboration is the path forward at this time.’

The group condemned all political violence, adding, ‘Charlie Kirk should not have died. We believe everyone should be able to share their ideas and beliefs without fear.’

TPUSA exploded with new interest after Kirk’s memorial service, receiving more than 120,000 campus chapter requests, according to the organization. 

Prior to the memorial service, TPUSA had around 60,000 requests, Andrew Kolvet, executive producer of ‘The Charlie Kirk Show’ recently said. TPUSA operates 900 official college chapters and approximately 1,200 high school chapters across the country. 

Wohltorf said more young people are standing by their values, pointing to faith and family as the most important priorities to many in his generation.

‘I like the saying that people were now posting in the past two weeks talking about how one Charlie Kirk is gone but one hundred thousand new Charlie Kirks were just created,’ Wohltorf said. ‘The majority of the conservative movement feels obligated to continue Charlie Kirk’s legacy and to continue to preach those family values, faith, and Christianity … I think that the majority conservative movement is even more likely to fight now and to speak out,’ Wohltorf said.

Oliver and Wohltorf believe these values will continue to be upheld for years to come after this political turning point. They say they’re inspired by Kirk’s legacy to share their beliefs and not be afraid.

‘I think the majority is trying to continue his legacy, feeling obligated to fight, feeling obligated to foster dialogue, debate, and challenge one another with ideas,’ Wohltorf said.

‘Ultimately, Charlie said he wants to be remembered for his courage, for his faith, and I think that message is resounding very strongly with my generation,’ Oliver said.

Trump posthumously awarded Kirk the Presidential Medal of Freedom, the nation’s highest civilian honor, Tuesday at the White House.

Fox News Digital’s Amanda Macias contributed to this report.

This post appeared first on FOX NEWS

The No. 3 House Republican is accusing Democrats of making a hypocritical argument in their resistance to the GOP’s federal funding bill.

The government shutdown is in its thirteenth day with Republicans and Democrats still unable to agree on a path forward. The Trump administration is taking steps to prevent the military from missing paychecks this week, while also beginning to lay off scores of federal workers amid the standoff.

Democrats have said they will not agree to any solution that does not include serious concessions on healthcare from the GOP — but House Majority Whip Tom Emmer, R-Minn., argued that they are themselves harming healthcare access by allowing the shutdown to continue.

‘They are [jeopardizing healthcare],’ Emmer told Fox News Digital, pointing out that certain telehealth services, for example, are going without funding during the shutdown.

‘We had a huge advance during the pandemic when it came to remote care. You’ve got all kinds of constituents that don’t live in a condensed or a dense urban area right next to a hospital, right next to a provider, they may be a distance away. And the telehealth option actually made a big difference,’ Emmer said. ‘I know it did for our veterans.’

‘I don’t know if the VA — [House Veterans Affairs Committee Chairman Mike Bost, R-Ill.] made it sound like they’re going to protect that under his jurisdiction, not sure how — but I do worry about it for the private providers, hospitals. How are they going to do it if they’re not getting reimbursed?’

He was referring to the Acute Hospital Care At Home program, originally created during the COVID-19 pandemic. It allows healthcare providers to bill Medicare for telehealth appointments and at-home aid that previously was only reserved for hospital care.

It’s become a popular program for elderly or otherwise vulnerable Medicaid recipients, but the ongoing shutdown has prevented Congress from being able to extend it.

The government entered into a shutdown nearly two weeks ago on Oct. 1 after Senate Democrats rejected the GOP’s federal funding plan. They have since blocked consideration of the same bill six more times. 

Republicans proposed a seven-week bill extending fiscal year (FY) 2025 federal funding levels through Nov. 21 called a continuing resolution (CR). It’s aimed at giving congressional negotiators more time to strike a longer-term agreement on FY2026, which began on Oct. 1.

It passed the House along mostly partisan lines on Sept. 19. But Democrats in the House and Senate were largely infuriated by being sidelined in federal funding talks and are now demanding any spending deal that also include an extension of COVID-19 pandemic-era enhanced Obamacare subsidies that are set to expire at the end of this year.

Democrats also introduced a separate counter-proposal that would completely eliminate healthcare reforms made in the GOP’s One Big Beautiful Bill Act (OBBBA) and restore funding to NPR and PBS that the Trump administration revoked earlier this year.

Democrats have said that proposal is aimed at rolling back Republicans’ Medicaid cuts. But Republicans have positioned it as the left’s effort at restoring federal funding for illegal immigrants’ healthcare — though Democratic leaders panned that as a lie.

Emmer also pointed out that it would revoke $50 billion for a rural hospital fund that OBBBA put in place.

‘The Rural Health Care Fund is a great example. I mean, right now, it’s our job, it’s the representatives’ job back in their districts, to try and work with our hospitals to make sure that they can access the funds,’ he said.

‘Because you don’t know exactly how deep the shutdown is going to impact hospitals, providers, ultimately consumers and patients.’

This post appeared first on FOX NEWS

A South Korean court heard arguments Tuesday seeking the death penalty for former President Yoon Suk Yeol, as prosecutors accused the ousted leader of orchestrating a rebellion through his controversial martial law declaration in December 2024.

Independent counsel Cho Eun-suk asked the Seoul Central District Court to impose the sentence, arguing that Yoon’s actions amounted to ‘anti-state activities’ and describing the decree as a ‘self-coup.’

Yoon, a conservative who was removed from office last spring, remains in custody while facing multiple criminal proceedings tied to the martial law episode and other controversies from his presidency. Prosecutors say the rebellion charge carries the most severe potential punishment.

Cho’s team argued in court that Yoon sought to prolong his hold on power by undermining South Korea’s constitutional system of governance.

Yoon has rejected the accusations, telling the court that the investigations into his conduct have been ‘frenzied’ and marked by ‘manipulation’ and ‘distortion.’

He has maintained that the declaration of martial law was intended to alert the public to what he viewed as the growing threat posed by the opposition Democratic Party, which used its legislative majority to block his political agenda. 

Yoon argued that the exercise of presidential emergency powers cannot be treated as rebellion under the law.

The court is expected to deliver a verdict next month. Legal experts have said a life sentence is more likely than execution, noting that South Korea has not carried out a death penalty since 1997.

Yoon is the first South Korean president who has faced a potential death penalty after leaving office since Chun Doo-hwan was sentenced to death in 1996 for various crimes. Chun’s death sentence was later commuted to life in prison, and he was subsequently pardoned and freed.

The Associated Press contributed to this report.

This post appeared first on FOX NEWS